최신Huawei HCIA-Access V2.5 - H35-210_V2.5-ENU무료샘플문제

A. ADRI

B. A64

C. DSLD

D. A32

A. Supports link aggregation in load sharing mode and non-load sharing mode (active/standby mode).

B. Support manual configuration and static LACP link aggregation, but does not support dynamic LACP link aggregation.

C. Cross-board aggregation is not supported

D. Supports up to 512 aggregation groups, and each aggregation group includes up to 8 physical ports.

A. All of the above are possible

B. Board failure or port failure

C. Line problem, or MODEM failure

D. Line activation template configuration error

A. add-double

B. transparent

C. translate-and-transparent

D. translate

A. Confirmed but not cleared

B. Unconfirmed and uncleared

C. Unconfirmed and cleared

D. Confirmed and cleared

A. Default static route

B. Static Route Load Balancing

C. Floating Static Routes

D. Static routes are permanently published

A. True

B. False

A. True

B. False

A. The rates of GPON and XGS-PON are different, but the network architecture is the same, so just change the optical module on the ONU to ensure that the device supports XGS-PON

B. Since the center wavelengths of XGS-PON and GPON are different, there is no overlap and conflict between each other, so the ODN network can be shared.

C. The WDM1r combiner can be deployed close to the CO or user as required.

D. The deployment of the WD1r combiner will not affect the calculation of optical link attenuation.

A. The LAN Switch may not recognize the MAC address, but must recognize the IP address.

B. Compared with the shared hub, a port of the LAN switch can be said to be a separate collision domain.

C. When the LAN Switch receives a packet containing an unrecognized MAC address, it directly sends the packet back from the port it received.

D. The LAN Switch mainly searches for the corresponding IP address according to the MAC address of the data packet to realize the forwarding of the data packet.

A. ADSL

B. VDSL

C. GPON

D. ADSL 2+

A. There are only 4 VLAN priorities in the 802.1Q Ethernet frame structure

B. The value of TPID in the 802.1Q Ethernet frame structure is 8100

C. 802.1Q Ethernet frame is 4 bytes more than ordinary Ethernet frame

D. Theoretically, the value range of VLAN ID is 0~4095