최신IBM Virtualization Technical Support for IBM i -v1 - C4040-121무료샘플문제

A. 8

B. 12

C. 4

D. 2

A. In the hosting IBM i partition profile --> Settings --> Boot Mode

B. In the "Properties" section of the AIX partition --> Keylock Position

C. In the client AIX partition profile --> Settings --> Boot Mode

D. In the client AIX partition --> bosboot --> bosboot -n -f

A. Modify the existing partition profile to not "use all resources in system" and own only what it
needs. Reactivate the profile.
Create partitions and profiles for the additional partitions.

B. Configure the new partitions.
Activate the new profiles to remove "required" features of the existing partition.

C. Create a new partition and profile for the original LPAR with only the resources the partition
needs. Create partitions and profiles forth additional partitions.
Delete the original partition.
Suspend the existing partition.

D. Modify the profile of the existing partition and concurrently enable it.
Resume the existing partition.
Create partitions and profiles for the additional LPARs.

A. Remove the unneeded hardware from the hosted partition's profile on the HM

B. Specify the devices to be unavailable in the Network Server Description.

C. Specify only the devices to be available in the Network Server Description.

D. Secure the device descriptions on the hosting partition with an authorization list.

A. Merge the shared-processor pool to be removed into one of the other pools.
Shut down the partition by deactivating it from the HMC.
Plush the memory cache by deactivating the shared-processor pool.
Delete the shared-processor pool.

B. Shut down the partition that is using the shared processor pool.
Change the maximum processing units to zero.
Assign the processor capacityto another pool.

C. Change the minimum processor for the partition to zero.
Shut down the partition by deactivating it from the HMC.
Delete the shared-processor pool.

D. Create a new shared-processor pool.
Merge all three shared-pools into the new pool using Live Partition Mobility
Shut down and remove the partition definition.

A. LPAR4 will start but only receive 0.2 of a processor.

B. LPAR4 profile cannot be saved until the maximum is set to 0.8 or less.

C. LPAP4 will not start since there is not enough processor capacity to satisfy the minimum.

D. All the partitions in the Shared Processor Pool will have their desired processing units reduced by .1 when LPAR4 is activated.

A. Cable and DIMM sizes can be specified to improve implementation efficiency.

B. SPT can be integrated with IBM i Performance Tools to assist with the sizing of new servers.

C. Any system plan can be exported as a configuration file (.CFR) and then imported into the Hardware Management Console or Integrated Virtualization Manager.

D. SPT can be used to design new partitions or validate the addition of new hardware in existing partitions.