최신Juniper Enterprise Routing and Switching, Professional (JNCIP-ENT) - JN0-648무료샘플문제

A. A community is not a transitive attribute.

B. A prefix can only belong to one community.

C. A prefix can belong to more than community.

D. A BGP device can set, append, or modify the community of a route.

A. Packets in low priority queues are serviced when strict-high priority queues have no available credits

B. Packets in low priority queues transmit only when start-high priority queues are empty

C. All strict-high priority queues are serviced in a round-robin fashion as long as they have remaining credits

D. All strict-high priority queues are serviced in a round-robin fashion regardless of available credits.

A. Apply a BGP export policy onR2to assign a lower origin value to routes advertised to ISP B

B. Apply a BGP export policy on R1 to assign a higher local preference value to routes advertised to ISP A

C. Apply a BGP export policy on R1 to assign a lower MED value to routes advertised to ISP A

D. Apply a BGP export policy to R2 to prepend [65001 65001 65001 65001 65001] to the AS path of routes advertised to ISP B

A. MSTP enables mapping multiple independent spanning tree instances onto one physical topology

B. MSTP dynamically manages VLAN registration in a LAN

C. MSTP uses slacked VLAN tags to extend a Layer 2 Ethernet connection between multiple sites

D. MSTP enables dynamic discovery of Layer 2 neighbors.

A. Add the multicast address to the [edit routing-options multicast ssm-map] stanza.

B. Add the multicast address to the [edit routing-options multicast ssm-groups] stanza.

C. Reconfigure the multicast source to use an address in the range of 224.0.0.0 through 224.255.255.255.

D. Reconfigure the multicast source to use an address in the range of 232.0.0.0 through 232.255.255.255.

A. It will be rejected by term 2.

B. It will be accomplished by term 1.

C. It will be accepted by term 1.

D. It will be evaluated by the next policy.

E. It will be accepted by the default policy

A. The supplicant is authenticated using 802. 1X

B. EAPoL traffic will be sent out of the ge-0/0/1 interface.

C. EAPoL traffic will not be sent out of the use ge-0/0/1 interface

D. The supplicant is not authenticated using 802. 1X

A. You must ensure that the VLANs are balanced between two different root bridges.

B. You must ensure that the bridge priority is set to the lowest value on all switches in the Layer 2 domain.

C. You must enable all VLANs, 2 through 300, under the VSTP configuration

D. You must enable RSTP to account for all VLANs.

A. multiple

B. captive-portal

C. single

D. single-secure

A. The current device was allowed after authentication attempts to the RADIUS server failed

B. Only 802. 1X authentication will be used for devices connecting to ge-0/0/15

C. Additional users will automatically be allowed to connect to ge-0/0/15

D. The current device is authenticated using MAC RADIUS