최신BICSI Registered Communications Distribution Designer - RCDD-001무료샘플문제

A. 1830 mm (72 in)

B. 900 mm (36 in)

C. 1220 mm (48 in)

D. 1520 mm (60 in)

E. 600 mm (24 in)

A. The maximum length of cable from the consolidation point (CP) to the outlet varies by media type.

B. They are to be terminated on separate connectors for each individual user.

C. They allow horizontal cables to be extended into work area pathways.

D. They are not to be used for direct connections to active equipment.

A. Elliptical wave guide

B. Circular wave guide

C. Hard line coaxial

D. Rectangular wave guide

A. Life safety

B. Distributed paging

C. Sound reinforcement and playback

D. Sound masking

A. 25

B. 12

C. 6

D. 100

E. 50

A. Adaptable for future placement or removal of facilities

B. Provides the security of additional physical cable protection

C. Is economical over a long life

D. Has a low initial installation cost

E. Preserves the aesthetic appearance of the premises

A. For security, each run should be terminated in the patch panel/ cross-connect at the dockmaster or
marina office.

B. Provide one or two pair cables from the boat slips to a distribution terminal on the

C. Place distribution cable onto the dock and terminate in a suitable cabinet or enclosure. Run service
drop to each boat slip.

D. Pre-cable each boat slip during construction.

A. 56 sq m (600 sq ft) to 84 sq m (904 sq ft)

B. 23 sq m (250 sq ft) to 56 sq m (600 sq ft)

C. 23 sq m (250 sq ft) to 84 sq m (904 sq ft)

D. 56 sq m (600 sq ft) to 100 sq m (1,100 sq ft)

E. 9.3 sq m (100 sq ft) to 23 sq m (250 sq ft)

A. The project is ahead of schedule.

B. The project is under budget.

C. The project is over budget.

D. The project is behind schedule.

A. 1300 nm

B. 850 nm

C. 1310 nm

D. 700 nm

E. 1550 nm