최신Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) - JN0-364무료샘플문제

A. path advertisements

B. path assignments

C. path announcement

D. path attributes

A. IBGP peers advertise routes received from EBGP peers to other IBGP peers.

B. IBGP peers advertise routes received from IBGP peers to other IBGP peers

C. IBGP peers do not advertise routes received from IBGP peers to other IBGP peers.

D. IBGP peers do not advertise routes received from EBGP peers to other IBGP peers.

E. EBGP peers advertise routes learned from IBGP or EBGP peers to other EBGP peers.

A. 6to4

B. 6over4

C. VXLAN

D. NAT6

A. By default, the metric of an interface is calculated based on the speed of the interface.

B. By default, all physical interfaces have a metric of 10.

C. Wide metrics enable interfaces to advertise metrics larger than 63.

D. Wide metrics enable an interface to advertise different metrics at Level 1 and Level 2.

A. VRRP communication between the two devices is not functioning correctly.

B. VRRP Is functioning normally in active/active mode.

C. Both routers are in the same state because they have the same VRRP priority.

D. The routers should use different virtual IP addresses for VRRP to function correctly.

A. egress routers

B. transit routers

C. peering routers

D. ingress routers

E. aggregation routers

A. mismatched authentication settings on the OSPF interfaces

B. mismatched OSPF hello intervals on the OSPF interfaces

C. mismatched MTU settings on the OSPF interfaces

D. mismatched subnet settings on the OSPF interfaces

A. The router at the other end of the link Is not sending any IS-IS Hello messages.

B. The family iso statement must be added to the logical interface.

C. The router at the other end of the link is a Level 1 only router.

D. This is a Gigabit Ethernet interface, that is incompatible with the reference-bandwidth 100g statement.