An enterprise adopts hardware SACG access method for admission control. The configuration commands are as follows, among which Key; Admin@123
[USG] right-manager server-group
[USG-rightm] localip 10.1.10.2
[USG-rightm]serverip 10. 1.31.78 shared-key AdnIn@123
[USG2100-rightm] right-manager server-group enable.
Assuming that the other configurations are correct, based on the above configuration only, which of the following options is correct?

• A. After completing the configuration, SACG cannot successfully link with Agile Contrlle-Campus. P
• B. After completing the configuration, SACG can successfully link with the Agile Controller-Campus.
• C. Can issue pre-authentication domain ACL.
• D. The linkage cannot be successful but the terminal can access the pre-authentication domain server.

Agile Controller-Campus The system architecture belongs to C/S Architecture.

• A. True
• B. False

The following is the 802.1X access control switch configuration:
[S5720]dot1x authentication-method eap
[S5720-GigabitEthernet0/0/1] port link-type access
[S5720-GigabitEthemet0/0/1] port default vlan 11
[S5720-GigabitEthernet0/0/1] authentication dot1x
Assuming that GE0/0/1 is connected to user 1 and user 2 through the HUB, which of the following options is correct?

• A. Neither user 1 nor user 2 can pass the authentication and access network resources.
• B. User 1 and User 2 must be individually authenticated before they can access network resources
• C. GE0/0/1 does not need to enable dot1X
• D. After user 1 is authenticated, user 2 can access network resources without authentication

For full encryption registered mobile storage devices must be formatted to normal use in not installed NAC client terminal host.

• A. TRUE
• B. FALSE

Visitors refer to users who need temporary access to the network at a specific location.

• A. True
• B. False