최신H3C Deploy and Manage the H3C CAS virtualization platform V3.0 - GB0-713무료샘플문제

A. The virtual switch uses the vNer0 port of the virtual switch, and the port is configured with VLAN 100. Then the physical switch port connected to the virtual switch must allow VLAN 100 to pass through, otherwise the virtual machine cannot communicate with the external network.

B. When adding a virtual switch, you must bind a physical interface, and when binding multiple physical interfaces, you must configure link aggregation mode and responsibility sharing mode.

C. The storage virtual switch must be configured with an IP address, otherwise the CVK host cannot mount the IP SAN storage through the storage virtual switch.

D. The uplink port of the virtual switch allows all VLANs to pass

A. When a server fails, DRS can automatically select a space server and restart the VM on an idle server.

B. V2V supports converting virtual machines in various formats such as VMware, Citrix, KVM, etc. into H3CCAS virtual machines

C. HA takes into account the virtual machine CPU, memory, I/O throughput load factors and the virtual machine's affinity to the physical host to dynamically adjust the distribution of business loads and improve system availability.

D. DRX takes into account the virtual machine CPU, memory, I/O throughput load factors and the virtual machine's affinity to the physical host to dynamically adjust the distribution of business loads and improve system availability.

A. Type and quantity of extension interfaces

B. Type and quantity of expansion slots

C. Motherboard bus frequency

D. Supported CPU types

A. CVM is responsible for server hardware resource management and virtual machine creation management

B. Each server needs to install CVM as the hypervisor layer of server virtualization

C. If the server is only used for CVM management and not as a CVK computing resource, the server does not need to support hardware-assisted virtualization.

D. CVM supports high availability (HA), dynamic resource scheduling (DRS), virtual machine backup, network policy templates and other functions

A. If the host has two HBA ports, the storage side has two controllers, and each controller has two HBA ports, then the host side can discover a total of 4 storage paths

B. Multipathing can be implemented in two modes: Active-Active mode and Active-Passive mode.

C. If there is no multipath software, one LUN will be recognized as multiple LUNs on the host side.

D. The main function of multipath is to improve reliability and achieve load balancing, but it cannot increase link bandwidth.

A. You can set the virtual machine to start with the host, but this function becomes invalid after HA is enabled.

B. After the virtual machine is created, you can add hard disks, network cards and other devices to the virtual machine

C. After the virtual machine is created, the display name cannot be modified.

D. All types of virtual hard disks support online addition and expansion.

A. When using the quick initialization method to configure the operating system information, the CAS Tools tool must be installed in the virtual machine template.

B. The deployed virtual machine needs to be added to the AD domain, so the operating system information needs to be configured using the full initialization method.

C. The deployed virtual machine needs to be added to the AD domain, so the operating system information needs to be configured using the quick initialization method

D. When using the full initialization method to configure the operating system information, it is required that the CAS Tools tool is installed in the virtual machine template.

A. The log file collection page does not support collecting log files for a single CVK host under cloud resources

B. The operation log records the information of user operations and system background automatic operations, and can be downloaded to the local for analysis

C. When cleaning up operation logs, only operation logs older than three months are allowed to be deleted

D. When the CVM host is abnormal, you can execute the "cas_collect_log_sh" command in the CVK host background to collect the log files of the CVK host.