2026년 CWNP Certified Wireless Design Professional 시험을 준비할 시간이 부족하신가요? ExamPassdump의 CWDP-303 연습문제는 최신 출제 경향을 반영한 60문항으로 구성되어 있어 짧은 시간에 핵심 내용만 집중적으로 학습하실 수 있습니다.

CWNP CWDP-303 시험 개요:

CWNP CWDP-303 시험 요강 주제:

CWDP-303 시험 자주 묻는 질문 총정리

최신 CWDP Wi-Fi Design CWDP-303 무료샘플문제

문제 #1

After designing and deploying a WLAN infrastructure, you realized the CCI is causing poor performance in the 2.4 GHz band. Primarily, you've designed the WLAN for 5 GHz and 2.4 GHz as a best effort. You found out that the implementers didn't follow your guidelines when configuring the WLAN infrastructure. What can you do to minimize as much as possible the CCI impact in the 2.4 GHz band?

A. Turn-off 2.4 GHz radios on some APs
B. Use all channels available in the 2.4 GHz band
C. Increase the transmit power on all APs
D. Add more APs to the infrastructure

문제 #2

Your customer's 802.11n laptops are not able to see the SSID in the 5 GHz band in the conference room.
When doing a walkthrough using one of these laptops, you confirm that it is unable to see the SSID in the 5 GHz band in the conference room. When using your own 802.11 ac laptop, you're able to see the SSID. What is the most likely cause of this problem?

A. The customer laptop does not support Transmit Beamforming
B. The AP is on channel 144
C. Their laptops are SISO clients
D. The AP is configured to use channel 36

문제 #3

In high-density environments, such as stadiums and convention centers, what extra factor has to be taken into account that can attenuate Wi-Fi signals when these environments are having an event?

A. I-Beams
B. Fire doors
C. Thick walls
D. People

문제 #4

During lunch time in the break room of a company, Wi-Fi connectivity on the 2.4 GHz band is intermittent.
Every other time of the day, it works fine. What's the likely cause of this issue?

A. The AP in the cafeteria keeps rebooting due to lack of PoE budget on the switch
B. Microwaves in the cafeteria are interfering with the Wi-Fi on the 2.4 GHz band
C. Toasters and ovens are heating up the air, raising the noise floor with the Wi-Fi on the 2.4 Ghz band
D. Employees are using their cell data instead of using the Wi-Fi

문제 #5

When doing some frame capturing over the air during a voice call, you realized that frames on the downlink (from the AP to the client) direction are not being transmitted with the correct UP value for voice frames, but on the uplink (from the client to the AP) direction are being transmitted correctly. What's the cause of this issue?

A. Somewhere on the wired network QoS markings aren't being trusted
B. Bad client driver
C. AP is not receiving enough PoE, thus not using QoS features
D. Faulty antenna on the AP

질문과 대답: