최신Cisco Introducing Cisco Data Center Technologies - 200-155무료샘플문제

A. It contains the management information tree.

B. It accepts and returns HTTPS messages that contain JSON or XML documents.

C. It includes classes and methods as programmatic entities.

D. It stores the configuration information and the state information of the APIC.

A. may contain server operating system

B. may be used to define the storage and networking characteristics of multiple servers

C. may contain IIUID MAC address for each virtual NIC, and WWN specifications for each HBA

D. may contain firmware version information

E. may contain VMware vSphere virtual machine definition

A. Partitioning

B. hardware abstraction

C. isolation

D. encapsulation

A. traffic load balancing

B. core fibre channel switching platform

C. management

D. network connectivity

E. comprehensive network analysis

A. CoPP

B. SMTP

C. NAT

D. BGP

E. ARP

A. NPIV requires a "write erase" and then reload the switch in order to come up into NPIV mode.

B. NPIV is a Cisco proprietary feature and as such works only between two Cisco switches.

C. NPIV can be enabled on a per-VSAN basis.

D. NPIV provides a means to assign multiple Fibre Channel IDs to a single N-port

E. NPIV must not be enabled on a switch that is also running N-port virtualization.

A. provides management for physical network devices

B. virtualizes network devices and provides resources to virtual devices

C. provides management for physical servers

D. virtualizes bare-metal server resources and provides resources to virtual machines

E. partitions physical servers into multiple virtual machines

A. must be connected directly by using Ethernet cables between L1-to-L1 and L2-to-L2 high-availability ports

B. must be connected virtually

C. must be connected directly by using Ethernet cables between L1-to-L2 and L2-to-L1 high-availability ports

D. must be connected directly by using any ports

A. application-centric

B. leaf-specific

C. performance-specific

D. network-centric

A. hypervisor controlled

B. pass-through switching

C. stare-and-forward switching

D. native switching

E. channeled uplink

A. copy running-config startup-config

B. zone default-zone permit vsan 2

C. zoneset activate zoneset2

D. zone copy active-zoneset full-zoneset

A. transit packets

B. packets destined for the device

C. packets indirectly destined for the device

D. control packets

A. show flogi database

B. show interface

C. show zoneset active

D. show vsan database

A. It provides a data plane of the 1000v system

B. It is responsible for communications with VMware vCenter and the VEM configuration

C. It runs over the data plane

D. It is responsible for communications with VMware

A. Cisco ASR 9000

B. Cisco IOS Software

C. Cisco NX-OS Software

D. Cisco 6509-E Switch

E. Cisco Fabric Extender

F. Cisco 1000v Switch

G. Cisco 6000 Series Switch

H. Cisco 4500E Switch